-20%
, ,

REEL, SHIMANO OCEA JIGGER JIGGING REEL (2017)

Availability:

In stock


  • Made In Japan
  • Provided Shimano’s Reel Warranty

ThumbnailStock MODEL WeightPriceQuantity
REEL, SHIMANO OCEA JIGGER JIGGING REEL (2017) - 2001NRHG 0 2001NRHG 800 g
-
+
spinner

Very often, when someone mentions Ocea Jigger, the image of a refined Jigging reel comes to mind. So how do you improve a legend? For Shimano, we start where it matters most, The Core. Fusing our most advanced manufacturing capabilities with the wants of anglers; we’ve made the 2017 Ocea Jigger’s cranking action even lighter and smoother than before while maintaining uncompromised strength and durability. Incorporating MicroModule gears, Infinity Drive and a cold forged long crank handle, the 2017 Ocea Jigger’s rotational resistance has been successfully reduced by approximately 60%. The new Jigger also features X-Protect, previously found only on the 2017 Twinpower XD. With X-Protect, waterproofing capabilities is greatly enhanced as water is prevented from entering the drive gear shaft and spool shaft bearing. On the exterior, a new star shape drag is added to lower the risk of line entanglement in high wind conditions. Minor tweaks have been made to the Hagane Body to give you a more comfortable grip. Never judge a reel by its covers because… Beauty comes from within.

 

 

 

MICROMODULE GEAR

With gear teeth refined to the limit, Micromodule Gear System enables seamless engagement and power transmission, giving anglers eternally smooth reeling.

 

 

 

 

 

HAGANE BODY

Made of highly rigid metals such as aluminium and magnesium. Weight has been greatly reduced while reel flexure, warp and distortion has been eliminated, allowing for smooth reeling with little power loss.

 

 

 

 

 

 

X-PROTECT

6 times more resistant than Core Protect, X-Protect utilizes a labyrinth (maze) structure and water-repellent treatment to prevent water from entering the ineer areas of a reel.

 

 

 

 

 

S COMPACT BODY

Compact body design to reduce weight and allow for better grip and leverage while fighting a fish.

 

 

 

 

 

 

E.I.

With E.I. after the anodisation process is finished, a second layer of surface treatment is added. This treatment is forced into the remaining surface impurities. This gives salt no hideout and also results in an extremely smooth-to-the-touch finish. A reel with E.I. treatment has more than double the corrosion resistance of standard anodized reel.

 

 

 

 

 

 

 

EXCITING DRAG SOUND

This audible and high exciting sound which occurs when a fish runs is a modern alternative to the traditional clicker or ratchet.

 

 

 

 

 

S-ARB

Shielded Anti-Rust bearings are similar to A-RB, but feature additional shields for the ultimate protection.

 

 

OFT Pancing Sdn Bhd is the authorised distributor for Shimano products in Malaysia and hereinafter referred as Shimano. Shimano warrants to the original purchase that this rod/reel will be free from non-conformities in materials and workmanship for a period of one (1) year for reels and two (2) years for rods. This warranty is effective from the date of purchase to the original purchaser only.

Rods and Reels Limited Warranty

During this period, Shimano will perform non breakage/repairs or effective replacement of rods/reels at Shimano’s option, with no cost to the original purchaser other than the cost of shipping charges incurred to our service facility. It also does not cover claims arising from wear and tear, improper use or neglect.

For breakage repairs of rods, a nominal replacement cost will be charged based on the following rod types:

  • Single Piece Rod: 40% of the complete rod SRP
  • Multi Piece Rod: 25% of the complete rod SRP for single section breakage, 40% of the complete rod SRP for two or more section breakages

Warranty Terms & Conditions

  • This warranty will be considered VOID if the rod or reel has been subjected to unauthorized alterations, abuse or damaged by your failure to provide necessary and reasonable maintenance.
  • Only rods/reels purchased from Shimano Authorized Outlets bearing the original warranty sticker are qualified for the warranty program. The usual service parts and repair costs applies to all other rods/reels that are purchased through other sources.
  • In the event that the rod/reel to be repaired has been discontinued, Shimano reserves the right to replace the discontinued rod with a newer model that has equivalent specifications/cost to the customer.
  • Further and in addition, the whole of this warranty shall not in any way whatsoever and howsoever apply to the following models/items:
      • Reel: FX, AX, Hyperloop, IX, Alivio
      • Rod: FXS, Scabard, Cruzar, Spinjoy TE, Stimula
  • Customer are reminded to remove all lines from reels when sending in reels (if applicable) for any service. Shimano will not be held responsible for any damages or loss for any lines.
  • Shimano will contact customer if there is any warranty/ repair doubts to be clarified or for repair quote purposes only.

Claim/Repair Procedure

To request warranty repairs or non-warranty service, please send your rod or reel to any Shimano Authorized Outlets.

Retailers for our products are not required or authorized to perform warranty repairs or exchanges on behalf of Shimano, nor are they authorized to modify this warranty in any way.

Shimano reserves the right to void this warranty if the reels/rods have been tampered, modified or subjected to repairs not authorized by Shimano.

In the case of warranty repair requests, (within the warranty period), the original copy of dated sales receipt and the original copy of Shimano Warranty Card must accompany any warranty claim. If your Shimano rod/reel should be found to require repairs outside of this warranty coverage (beyond warranty period), Shimano or Shimano Authorized Outlets will perform the repair and send a claim for parts, labour and shipping charges (if applicable).

Claim Submission Checklist

Please ensure that the following items are present when submitting your rod/reel for a warranty claim.

  • Valid warranty sticker on rod/reel
  • Dated sales receipt
  • Customer copy of warranty card completed and filled with owner/product/purchase information
  • Completed and filled Shimano copy of Warranty Card to be submitted within 14 days of purchase
  • Complete product for the claim

Shimano reserves the right to reject or void the warranty should any of the above items/requirements not be met. Please note that any tampering or false declarations made in the card will deem the warranty void with immediate effect.

SKU: 144247 Categories: , , Tag:
Weight 800 g
MODEL

2001NRHG

MODEL 2001NRHG
SHIMANO OCEA JIGGER JIGGING REEL (2017) GEAR RATIO 6.2
BEARING
8/1
WEIGHT (g) 595
DRAG POWER 10.0 kg
RETRIEVE 117cm
LINE CAPACITY PE (NO./M) 3-400,4-300,5-220
HANDLE POSITION LEFT
-->
All search results